Edge-lighting 17 Port Linear Canopies Without Transformers Instrukcja Użytkownika Pobierz pdf (Strona 2)

4: Tap the anchors through the mounting plate holes onto the

marked point up to the threaded portion with a hammer.

5: Screw in the threaded portion of the anchors with a Phillips

screwdriver.

NOTE: All 4 anchors must be installed to balance the pendants

weight.

MOUNTING PLATE

ANCHOR

6: Secure the mounting plate to the anchors with the provided

#8 screws and washers.

WASHER

7: Make sure that the mounting plate is grounded in

accordance with local electrical codes.

MOUNTING PLATE

ELECTRICAL BOX

NOTE: Make sure a person holds the Fast Jack canopy while the

electrician connects the wires and completes the installation.

8: Connect each canopy wire to one low voltage transformer

wire with a wire nut.

#8 SCREW

FAST JACK CANOPY

MOUNTING PLATE

#8-32 SCREW

FAST JACK CANOPY

9: Place all wires and wire nut connections inside the canopy.

10: Place the canopy onto the mounting plate and tighten the

fourteen #8-32 screws.

FAST JACK

FIXTURE

CONNECTOR

FAST JACK

CANOPY

PORT

11:

one Fast Jack canopy port.

Use fingers to tighten each Fast Jack fixture connector into

CAUTION: Risk of Fire: The total load of the Fast Jack

canopy ports should not exceed the remote transformer rated

capacity.

1 2

Brak uwag

Edge-lighting 17 Port Linear Canopies Without Transformers Instrukcja Użytkownika Strona 2