Edge-lighting Alpha Instrukcja Użytkownika Pobierz pdf (Strona 2)

MOUNTING BRACKET TAB

6: Connect the white fixture wire to the neutral power wire with

a wire nut.

7: Connect the black fixture wire to the hot power wire with a

wire nut.

FIXTURE BODY HOLE

8: Place all wires and wire nut connections behind the fixture

body.

9: Place the left fixture body hole onto the mounting bracket

tab.

FLAT HEAD

PHILLIPS SCREW

FIXTURE

BODY

CANOPY

10: Secure the other fixture body hole with the flat head

Phillips screw provided.

LAMP

SOCKET

GLASS COVER

SPRING

CLIP

CAUTION: To reduce risk of a burn or electrical shock during

lamping, disconnect the power to the fixture.

Use MAX 60 Watt Type T4, G9 Base, Bi-Pin

Halogen Lamp.

NOTE: Use only fingers and a soft cloth to install the lamps.

11: Push the lamp pins completely into the socket holes.

12: Loosen the screws on the spring clips to insert the glass

cover under the clips. Slightly tighten the spring clip screws

to secure glass cover in place.

1 2

Brak uwag

Edge-lighting Alpha Instrukcja Użytkownika Strona 2