Edge-lighting 2" Power Feed Canopies Instrukcja Użytkownika Pobierz pdf (Strona 2)

Install the Monorail to Power Feed Canopy

CAP

3/8-24 SET SCREW

POWER HOUSING

1: Unscrew the cap from power housing.

2: Slightly loosen the 3/8-24 set screw on the cap with the

3/16 Allen wrench provided, DO NOT REMOVE IT.

MONORAIL

POWER HOUSING

CAP

3: Place the Monorail into the power housing. Make sure that

the Monorail is supported by the standoffs. Refer to the

instructions provided with the standoffs.

4: Tighten the cap to the power housing. Make sure the cap

is not cross threaded.

5: Tighten the 3/8-24 set screw with the 3/16 Allen wrench

provided on the cap firmly for proper power connection.

CAP

3/16 ALLEN WRENCH

3/8-24 SET SCREW

3/16 ALLEN WRENCH

1 2

Brak uwag

Edge-lighting 2" Power Feed Canopies Instrukcja Użytkownika Strona 2